Installation Guide

Victory Bracket Installation Guide & Warranty Information 4
Internal Mounting Options
The Victory Bracket can be mounted inside a cabinet or structural wall
in a variety of ways.
Option 1A: Mounting Bracket to Back or Side of Cabinet
1 – Notch top wall ½” by 2 ⅛”. Cut ½” radius on inside wall.
2 – If mounting to side of cabinet, use a jigsaw to cut a slot at least ½"
by 2 ⅛" in any support that obstructs the bracket’s t.
3 – Using bracket as a template, mark and drill ⅛” pilot holes ½” deep.
4 – Make sure bracket ts tightly on wall surface.
5 – Attach bracket to wall using ¾” wood screw in each hole.
6 – Install countertop and apply caulk along sides of bracket under
countertop.
Option 1: Mount to Cabinet
wall thickness usually ¾" to 2"
Option 2: Single Level, Wall Mount
wall thickness usually 4"
Option 3: Two Level, Wall Mount
wall thickness usually 4"