Installation Guide

Victory Bracket Installation Guide & Warranty Information 3
Bracket Size Selection
The Victory Bracket is designed to support overhangs between 8″ and
24″. The wall thickness must be between ¾″ and 4″. If necessary, attach
plywood to inside of the cabinet wall to meet the minimum thickness
requirement.
When mounting behind the cabinet or structural wall, the chart below
can be used to nd the correct bracket size for your countertop.
When mounting externally, subtract 2" from your overhang length and
select the closest bracket size.
Bracket Spacing Calculation
The two outer brackets should be placed 3" from the end or corner of the
countertop. The spacing between brackets can be determined using the
formula below:
Spacing (S)
=
Width (W) – 6
# of Brackets – 1
Legend
Bracket Distance to End/Corner W Width S Spacing
Overhang Length
8" 10" 12" 14" 16" 18" 20" 22" 24"
Wall Thickness
¾" 8" 8" 10" 12" 12" 14" 16" 18" 18"
2" 8" 10" 10" 12" 14" 16" 16" 18" 20"
3" 10" 10" 12" 14" 14" 16" 18" 20" 22"
4" 10" 12" 12" 14" 16" 16" 18" 20" 22"