Installation Guide

Victory Bracket Installation Guide & Warranty Information 6

Internal Mounting Options continued

Options 2 and 3: Mounting Bracket to Wall

Reference the numbers below with the diagram

1 – Install 2x4 cross braces between wall studs to support bracket. The

bracket can be mounted on stud or any location on cross braces.

Use bracket as template to locate cross braces.

2 – If a single-level countertop, notch top of 2x4 cap ⅝" by 2 ⅛".

Cut ⅝" radius on inside wall. If two-level countertop, make

additional notches on back of wall ⅝" deep by 2 ⅛" so backsplash

or nished surface can cover bracket.

3 – Make sure bracket ts tightly on wall surface.

4 – Attach bracket to wall using a ¾" wood screw in each hole.

5 – Install countertop and apply caulk along sides of bracket under

countertop.