Installation Guide

Product Specification
Sizes
Product Specification | Hobart Ladies 812891W
Hobart Ladies 812891W
Description
5-inch ankle height elastic-sided Romeo boot.
Upper Materials
Cowhide water-resistant waxy leather and stitched with nylon
thread. Non-Corrosive Lacing. Fitted on a true ladies last.
Toe Cap
Ergo-Defender™ wide profile steel toe box.
ASTM F2413-11 F I/75 C/75 EH.
Lining Materials
This boot is lined with Baltico
®
, which is a soft, non-abrasive,
hydrophobic material that wicks perspiration away from the
foot, enabling the skin to remain cool and dry.
Full Innersole
A full length footbed that is inserted into the footwear
to offer additional support and comfort. This footbed is
made from soft polyurethane that will retain its shape and
thickness throughout the life of the boot.
Insole
Heavy-duty, flexible anti-bacterial non-woven insole.
Midsole
Directly moulded Polyurethane midsole for greater shock
absorption.
Outsole
Non-conductive Thermoplastic Urethane (TPU) outsole
for superior wear properties. Heat resistant to 266ºF.
ASTM F2913-11 Coefficient of Friction - Forward Flat Slip
Resistance Oily/Wet 0.40.
Superior Underfort Comfort
The Steel Blue Trisole
®
Comfort Technology system is a
patented three density soling system that offers a high level
of comfort, shock absorbency and energy return. The system
uses PORON
®
as energy absorbing pads under the pressure
points of the foot to give the wearer superior comfort and
offers similar shock absorbency and comfort to sports
footwear.
Footwear marked as EH has been tested and shown to
withstand the application of 18,000 V at 60 Hz for a period of 1
minute with no current flow or leakage in excess of 1.0 mA in
dry laboratory conditions. This footwear is not suitable where
anti-static properties are needed.
Note
EH Series footwear is intended for use as secondary
protective personal equipment. It is to be used in conjunction
with primary protective equipment in areas and environments
where there is a need to reduce the risk of electric shock due
to accidental contact with live electric wires.
Wide Fit
4 - 11 | Full Sizes
Colours Sole Resistance
Black
EH TPU
SLIP Better
OIL Better
CHEMICAL Better
ABRASION Best
HEAT Better
NON-MARKING Yes
FLEXIBILITY Best
METAL CHIPS Yes
All Steel Blue boots are
independently certified
to major international
safety standards.
Meets International Safety Standards
✓ American Standard ASTM F2413-11 F I/75 C/75 EH
✓ European Standard EN ISO 20345
✓ Australian/NZ Standard AS/NZS 2210.3
For more information, visit www.steelblue.com