User manual

17
741.011 | 12.18
EN
7.2.2 Symbols used in the system graphics
The following table describes the symbols used in the system graphics ( in Fig. 8).
Symbol Description Symbol Description
Pipework Pump, switched on
Collector (array) Pump, switched off
Maximum collector tempera-
ture reached
Temperature sensor
Storage tank Back-up heating
Swimming pool Solid fuel boiler
Sufficient solar irradiation
available for loading
Domestic water outlet
7.2.3 Settings menu
The settings menu ( in Fig. 8) contains the following entries:
S
yst
F
unc
P
ara
SET
Time System
Functions Parameters
Reset to factory settings
7.2.4 Pictograms for functions
The following table describes the pictograms used for functions ( in Fig. 8).
Symbol Description Symbol Description
Manual operation Holiday – recooling
2)
Pump is speed controlled
1)
Anti-freeze
2)
Interval
2)
Stagnation reduction
2)
1)
Symbol is visible while the function/parameter is being edited in the settings menu.
2)
Symbol flashes: The function is activated and is actively intervening in the control process.
Symbol does not flash: The function is activated and is not actively intervening in the control
process or
the function is currently being edited in the setting menu.