User manual

DOD level charge reset
NOTICES
n Discharge depth at which countdown of the charging time
U1 is restarted.
n A value of 0.02 means a 2 % depth of discharge relative to
the configured battery capacity.
✔
‘Main menu è Battery settings è NiCd battery settings
è Charging time U1’
1. Press SET. The DOD level charge reset
dialogue appears
(Fig. left).
2. Press SET. The value flashes.
3.
Press D, Ñ to change the value.
4. Press SET. The value stops blinking.
Lower charge voltage U2
NOTICE
Target value for the lower charge voltage U2 in the two-stage
charging process.
✔
‘Main menu è Battery settings è NiCd battery settings
è Lower charge voltage U2
’
1. Press SET. The Lower charge voltage U2 dialogue appears
(Fig. left).
2. Press SET. The value flashes.
3.
Press D, Ñ to change the value.
4. Press SET. The value stops blinking.
Temp. factor U2 (>0°C)
NOTICES
n Temperature compensation factor for the lower end-of-
charge voltage U2 at positive temperatures.
n Specification of the adjustment factor in mV per cell and
per degree of temperature change.
✔
‘Main menu è Battery settings è NiCd battery settings
è Temp. factor U2 (>0°C)
’
1. Press SET. The Temp. factor U2 (>0°C)
dialogue appears
(Fig. left).
2. Press SET. The value flashes.
3.
Press D, Ñ to change the value.
4. Press SET. The value stops blinking.
756.404 | Z01 | 16.06 83