User manual

The following also applies:
n The controller must not be connected to the public electricity grid.
n Only solar modules may be connected to the solar module connections.
n Possible system voltages for the MPPT 6000-M/-S (nominal battery voltages): 12 V, 24 V, 36 V,
48 V, 60 V; (12 V, 24 V and 48 V: automatic detection; 36 V, 60 V: manually set via the Expert
menu).
n The controller performs, in particular, the following tasks:
–
Maximisation of power extraction from the modules via an integrated MPP tracker.
– Controlling of the charging process.
– Recording of yield and system data.
– Recording of data on a microSD card (MPPT 6000-M only).
– Integration of StecaLink-compatible devices (MPPT 6000-M only).
– Charging control via the AUX IO input (MPPT 6000-M only).
– Programmable AUX1/2/3 outputs (MPPT 6000-M only).
– UART/RS-232 data output (MPPT 6000-M only).
1.5 Markings
1.5.1 Symbols for warnings and notices
Symbol Description Location
General danger warning. Instructions
Danger from electricity. Instructions
Danger from hot surfaces. Instructions
Danger from battery acid. Instructions
Read the manual before using the product. Device
General information. Instructions
✔
The following information describes prerequisites
for further operation.
Instructions
756.404 | Z01 | 16.06 8