User manual

Float charging
✔
‘Main menu è Battery settings è Charge voltages
è Float charging’
1. Press SET. The Float charging dialogue appears (Fig. left).
2. Press SET. The Float charge voltage value flashes.
3.
Press D, Ñ to change the value.
4. Press SET. The value stops blinking.
Boost charging
NOTICES
n If the State of charge (SOC) control mode is selected
then the starting threshold is specified as %-SOC.
n If the Voltage control control mode is selected then
the starting threshold is specified as V.
✔
‘Main menu è Battery settings è Charge voltages
è Boost charging’
1. Press SET. The Boost charging dialogue appears (Fig. left).
2. Press SET. The Starting threshold value flashes.
3.
Press D, Ñ to change the value.
4. Press SET. The value stops blinking.
5.
Press Ñ to select Boost charge voltage.
6. Press SET. The Boost charge voltage value flashes.
7.
Press D, Ñ to change the value.
8. Press SET. The value stops blinking.
Equalisation charging
NOTICES
n This setting is only possible for the lead-acid battery type.
n If the State of charge (SOC) control mode is selected
then the starting threshold is specified as %-SOC.
n If the Voltage control control mode is selected then
the starting threshold is specified as V.
✔
‘Main menu è Battery settings è Charge voltages
è Equalisation charging
’
1. Press SET. The Equalisation charging dialogue appears
(Fig. left).
2. Press SET. The Starting threshold value blinks.
3.
Press D, Ñ to change the value.
4. Press SET. The value stops blinking.
756.404 | Z01 | 16.06 67