User manual

Current limit device: Value
✔
‘Main menu è Battery settings è Current limit device’
1. Press SET. The dialogue Device current limit appears
(Fig. left).
2. Press SET. The value flashes.
3.
Press D, Ñ to change the value.
4. Press SET. The value stops blinking.
8.5 Lead-acid battery system functions
8.5.1
Equalisation cycle mode
NOTICE!
Cyclic equalisation charging settings are only available for the lead-acid battery type. These
settings allow activation/deactivation of cyclic equalisation charging and configuration of a
fixed duration between each cyclic equalisation charging process.
Deactivating/activating cyclic equalisation charging
✔
‘Main menu è Battery settings è Equalisation cycle mode
è On/Off’
1. Press SET. The Equalisation cycle mode dialogue appears
(Fig. left).
2.
Press D, Ñ to select On or Off.
3. Press SET. Cyclic equalisation charging is switched on or off
accordingly.
Cycle duration
✔
‘Main menu è Battery settings è Equalisation cycle è Cycle’
1. Press SET. The Equalisation cycle dialogue appears (Fig.
left).
2. Press SET. The value flashes.
3.
Press D, Ñ to change the value.
4. Press SET. The value stops blinking.
756.404 | Z01 | 16.06 62