User manual

Battery cables
MPPT 6000-M/-S power
900 W 1800 W 3600 W
Total cable length ("B+" und "B−") in m, insulation: 85 °C
Power loss <2 % (17
W)
Power loss <1 % (17
W)
Power loss <0.5 % (17
W)
2 x 3 m 2 x 2 m 2 x 3 m 2 x 2 m 2 x 3 m 2 x 2 m
Battery
voltage
12 V
35 mm
2
AWG 2
25 mm
2
AWG 3
24 V
10 mm
2
AWG 7
6 mm
2
AWG 10
35 mm
2
AWG 2
25 mm
2
AWG 3
48 V
2.5 mm
2
AWG 13
1.5 mm
2
AWG 15
10 mm
2
AWG 7
6 mm
2
AWG 10
35 mm
2
AWG 2
25 mm
2
AWG 3
WARNING!
Contact your dealer for information on the recommended cable cross section if you require
longer cable lengths for the solar module, battery and loads than specified for the
recommended cables in the table above!
12.3 UART/RS-232 interface protocol (MPPT 6000-M only)
12.3.1
Settings
Signal/Information Value Units Action
RS232 bits per second 4800 Baud Fixed value, not configurable.
RS232 data bits 8 bit 8 bit data; fixed value, not configurable.
RS232 parity None Fixed value, not configurable.
RS232 stop bits 1 Fixed value, not configurable.
RS232 flow control None Fixed value, not configurable.
756.404 | Z01 | 16.06 142