User manual

9.3.1 Deep discharge protection
The deep discharge protection switches the output on and off independently of the control
functions.
Switching behaviour
The deep discharge protection switches the output off when the switch-off threshold is reached and
switches it on again when the battery charge state is the switch-on difference greater than the
switch-off threshold.
Operation
✔‘Main menu è Settings AUX 1/2/3 è <Output> è Deep discharge prot.
’
9.3.2 Evening light function
The evening light function switches the output on and off based on the brightness and time. The
reference point is the time of dusk. The evening light function is suitable for loads that are operated
a certain time after nightfall, e.g. lighting, heating.
Switching behaviour
n The output remains switched on during the switch-on duration ⑥ (Fig. below) but the switch-
on is delayed by the switch-on delay ⑤.
n When dawn is detected the output is switched off, even if the switch-on duration has not
expired.
Operation
✔‘Main menu è Settings AUX 1/2/3 è <Output> è Select function
’
✔‘Main menu è Settings AUX 1/2/3 è <Output> è Function settings è Evening light’
t
1 2
5
3
6
4
①
Dusk
②
Switch-on time
③
Switch-off time
④
Dawn
⑤
‘Switch-on delay’
⑥
‘Switch-on duration’
9.3.3 Night light function
The night light function switches the output on and off based on the brightness and time. The
reference points are the times of dusk and dawn. The night light function is suitable for loads that
are only operated at night, e.g. emergency lighting.
Switching behaviour
The output is switched on at the switch-on delay ⑤ (Fig. below) after dusk and switched off at the
switch-off delay ⑦ before dawn.
Operation
✔‘Main menu è Settings AUX 1/2/3 è <Output> è Select function
’
✔‘Main menu è Settings AUX 1/2/3 è <Output> è Function settings è Night light’
756.404 | Z01 | 16.06 107