User manual

6.
Press Ñ. The Switch-on duration dialogue appears.
7. Press SET, repeat steps 3 to 5 for the switch-on duration.
8. Press ESC. The AUX function settings menu appears
Setting Timer1
✔
‘Main menu è Settings AUX 1/2/3 è <Output>
è Function settings’
1.
Press Ñ until Timer 1 is selected.
2. Press SET. The Switch-on time dialogue appears and the
selected day is underlined (Fig. left: Monday is underlined and
switched off).
3.
If necessary, press D, Ñ to select a different day.
4. Press SET. The state of the selected day changes (Fig. left:
Monday is switched on).
5.
Press D, Ñ to select another day as required.
6. Repeat steps 4 to 5 until all days are switched on for which the
switch-on time is to apply.
7.
Press Ñ (several times if necessary) until the hour of the switch-
on time is selected (Fig. left).
8.
Press SET, then use D, Ñ to set the hour and confirm with SET.
9.
Press Ñ. The minutes are selected.
10.
Press SET, then use D, Ñ to set the minutes and confirm with
SET.
11.
Press Ñ. The Switch-off time
dialogue appears (Fig. left).
12. Set the day and time of the switch-off time in the same
manner as described in steps 3 to 10.
13. Setting of the Evening light and Timer 1 control
functions is now finished. Press ESC to leave the page.
9.3 Functionality
NOTICE!
With all brightness-based control functions, the required brightness information is obtained
from the solar module.
756.404 | Z01 | 16.06 106