User manual

Setting the operating mode
✔
‘Main menu è Settings AUX 1/2/3’
1. Select an output in the Settings AUX 1/2/3 menu (Fig.
left).
2. Press SET. The menu for setting the output appears,
Operation mode is selected (Fig. left).
3. Press SET. The option fields for setting the operating mode are
displayed.
NOTICE
The AUX 1/2/3 outputs are disabled in the default factory
settings (Operation mode = Off).
4.
Press D, Ñ to change the selection.
On: The output is switched on.
Off: The output is switched off.
Function: The control functions automatically switch the
output.
5. Press SET. The selected operation mode is switched on.
6. Press ESC to leave the page.
Configuring the deep discharge protection
✔
‘Main menu è Settings AUX 1/2/3 è <Output>
è Deep discharge protection
’
1. Press SET. The disconnection threshold is displayed (Fig. left).
2.
Use D, Ñ to set the disconnection threshold and confirm with
SET.
NOTICE
The parameter is set as an SOC value in % or a battery voltage
value, depending on the configured control mode and the
configured battery type. A value of
≥ 30 % is recommended.
3.
Press Ñ. The reconnection hysteresis is shown.
756.404 | Z01 | 16.06 104