User manual

1. Press SET. List of data is displayed (Fig. left).
2.
Press D, Ñ to page through the list of data.
3. Press ESC. Navigate back to the menu.
Maximum charge current
NOTICES
n Record of the maximum battery charge current for each
day over the last 30 days.
n A value of 0.00 A is displayed if the device was not active.
✔
‘Main menu è Internal data logger è Max. charge current
’
1. Press SET. List of data is displayed (Fig. left).
2.
Press D, Ñ to page through the list of data.
3. Press ESC. Navigate back to the menu.
Maximum PV 1 voltage
NOTICES
n Record of the maximum voltage measured at connection
M1 for each day over the last 30 days.
n A value of 0.00 V is displayed if the device was not active.
✔
‘Main menu è Internal data logger è Max. PV 1 voltage
’
1. Press SET. List of data is displayed (Fig. left).
2.
Press D, Ñ to page through the list of data.
3. Press ESC. Navigate back to the menu.
Maximum PV 2 voltage
NOTICES
n Record of the maximum voltage measured at connection
M2 for each day over the last 30 days.
n A value of 0.00 V is displayed if the device was not active.
✔
‘Main menu è Internal data logger è Max. PV 2 voltage
’
1. Press SET. List of data is displayed (Fig. left).
2.
Press D, Ñ to page through the list of data.
3. Press ESC. Navigate back to the menu.
756.404 | Z01 | 16.06 98