User manual

Energy output
Configuration
NOTICES
n This dialogue is used for selecting the devices whose
current/power information is to be included in the energy
output logging.
n Only the information sources selected in this list are used
for determining the energy output values.
✔
‘Main menu è Internal data logger è Energy output
è Configuration
’
1. Press SET, the Energy output members dialogue appears
(Fig. left).
2.
Press D, Ñ to change the selection.
3. Press SET. The check box is activated or deactivated
accordingly and the selection is adopted.
4. Press ESC. Navigate back to the Configuration menu.
8.9.3 Min./Max. values
The following min./max. values can be queried in the Internal data logger menu:
n
Ä ‘Minimum battery voltage’ on page 97
n
Ä ‘Maximum battery voltage’ on page 97
n
Ä ‘Maximum charge current’ on page 98
n
Ä ‘Maximum PV 1 voltage’ on page 98
n
Ä ‘Maximum PV 2 voltage’ on page 98
Minimum battery voltage
NOTICES
n Record of the minimum battery voltage for each day over
the last 30 days.
n A value of 0.00 V is displayed if the device was not active.
✔
‘Main menu è Internal data logger è Min. battery voltage
’
1. Press SET. List of data is displayed (Fig. left).
2.
Press D, Ñ to page through the list of data.
3. Press ESC. Navigate back to the menu.
Maximum battery voltage
NOTICES
n Record of the maximum battery voltage for each day over
the last 30 days.
n A value of 0.00 V is displayed if the device was not active.
✔
‘Main menu è Internal data logger è Max. battery voltage
’
756.404 | Z01 | 16.06 97