User manual

Temp. factor U2 (<0°C)
NOTICES
n Temperature compensation factor for the lower end-of-
charge voltage U2 at negative temperatures.
n Specification of the adjustment factor in mV per cell and
per degree of temperature change.
✔
‘Main menu è Battery settings è NiCd battery settings
è Temp. factor U2 (<0°C)
’
1. Press SET. The Temp. factor U1 (<0°C)
dialogue appears
(Fig. left).
2. Press SET. The value flashes.
3.
Press D, Ñ to change the value.
4. Press SET. The value stops blinking.
Number of NiCd cells
NOTICE
The number of NiCd cells connected in series.
✔
‘Main menu è Battery settings è NiCd battery settings
è Number of NiCd cells’
1. Press SET. The Number of NiCd cells dialogue appears
(Fig. left).
2. Press SET. The value flashes.
3.
Press D, Ñ to change the value.
4. Press SET. The value stops blinking.
U2 U1 switch
NOTICES
n Threshold for activation of the upper charge voltage U1 in
the two-stage charging process.
n The lower charge voltage U2 remains active if this
threshold is not crossed.
✔
‘Main menu è Battery settings è NiCd battery settings
è U2 U1 switch’
1. Press SET. The U1 activation level dialogue appears (Fig.
left).
2. Press SET. The value flashes.
3.
Press D, Ñ to change the value.
4. Press SET. The value stops blinking.
756.404 | Z01 | 16.06 84