User manual

MPPT 6000-M:
For the Remote setting, see Ä Chapter 6.3 ‘AUX IO remote
control input connection (MPPT 6000-M only)’ on page 41.
MPPT 6000-S:
For the Redundancy setting, see
Ä Chapter 6.8 ‘Redundancy
function (MPPT 6000-S only)’ on page 51.
Displaying advanced information
✔
‘Main menu è Information
’
1.
Press D, Ñ to select an entry (Fig. left).
2. Press SET to open the entry.
The entries contain the following information:
n Contact details
(Fig. left): The manufacturer's address
as text and QR code.
n System info (Fig. left):
– Product designation
– Serial number
– Version of the software module
– Address of the controller on the StecaLink slave bus
– Version of the operating instructions for the inverter
Calling up the expert menu for battery settings
CAUTION!
Risk of damaging the system. The expert menu allows modification of settings that require
specialist technical knowledge. The expert menu must therefore only be used by professional
personnel who know the applicable regulations and standards.
NOTICE!
The availability and scope of the settings in the expert menu depends on the currently selected
battery type (not available for Li-Ion batteries), see
Ä Chapter 3.4 ‘Menu structure’ on page 17
and the configuration of the system functions for the selectable battery types.
756.404 | Z01 | 16.06 57