User manual

Set the language
1. Press SET. The main menu appears and the Device On/Off
entry is selected (Fig. left).
NOTICE
English is set as the default menu language at the factory. In a
master/slave system, enabling the Save setting
parameter
for the slave allows the language setting of the master to be
transferred to the slave, see
Ä Chapter 8.8.3 ‘Changing the
MPPT 6000-S slave settings (MPPT 6000-M only)’ on page 87.
2.
Press Ñ until System settings is selected.
3. Press SET. The System settings menu appears and
Language is selected (Fig. left).
4. Press SET. The Language menu appears (Fig. left).
5.
Press D, Ñ to select another language as required.
6. Press SET.
7. PressESC, the System settings menu appears and the
selected language is active.
Set the time
1. The System settings menu appears after completing the
language selection (Fig. left).
2.
Press Ñ to select Time/date.
3. Press SET. The Time and date menu appears and Time is
selected.
4. Press SET. The
Time setting dialogue appears (Fig. left).
5. Press SET. The hours display flashes.
6.
Press D, Ñ to change the hour.
7. Press SET. The hour stops blinking.
8.
Press Ñ. The minutes are selected.
9. Repeat steps 5 to 7 for the minutes.
Set the date
1. Press ESC. The Time and date menu appears (Fig. left).
2.
Press Ñ to select Date.
3. Press SET. The Date setting dialogue appears (Fig. left).
4. Press SET. The day flashes.
5.
Press D, Ñ to change the day.
6. Press SET. The day stops blinking.
7.
Press Ñ to select the month.
756.404 | Z01 | 16.06 34