User manual

Information/column Value
Ibat_total[A]SOC
n Current information according to the sources selected in the
member list in ‘Menu è Settings è Battery è Control mode è .’
n The currents of the selected sources are added according to their
prefix.
n Charge current is displayed as positive ( ‘+’ )
n Discharge current is displayed as negative ( ‘
−’ )
Icharge_total[A] Total of the selected energy input sources.
Iload_total[A] Total of the selected energy output sources.
BatPower_total[W] Total charge/discharge power according to the sources selected in the
member list in ‘Menu è Settings è Battery è Control mode è .’
BatTemp[°C]
n Value of the external battery temperature sensor, if connected.
n ‘-’ if no value is present.
ChargeMode
n ‘OFF’ if the device is OFF or during the battery capacity test.
n Charge mode identifier: F,B,E,L,A,I.
ErrorState Error state: 0-No errors, 1-Information, 2-Warning, 3-Error.
ErrorNr
n Error code
n "-" if no value is present.
StateAux1 Switching state of AUX 1 relay
0 OFF, 1 ON
StateAux2 Switching state of AUX 2 relay
0 OFF, 1 ON
StateAux3 Switching state of AUX 3 relay
0 OFF, 1 ON
IntTemp1[°C] Internal device temperature string 1.
IntTemp2[°C] Internal device temperature string 2.
Derating 0 - Derating not active, 1- Derating active.
Ah_in_24h_M[Ah] Ah meter of the energy loaded through the MPPT 6000-M during the
period from 00:00 to 23:59.
Ah_in_total_M[Ah] Ah meter of the total energy loaded through the MPPT 6000-M since
initial commissioning.
Ah_in_24h_SYS[Ah] Ah meter of the energy input members total during the period from
00:00 to 23:59.
Ah_in_total_SYS[Ah] Ah meter of the energy input members total since initial commissioning.
Ah_out_24h_SYS[Ah] Ah meter of the energy output members total during the period from
00:00 to 23:59.
756.404 | Z01 | 16.06 147