Datasheet

SLCFxxxM2TU(I)(-x) CompactFlash Card
Datasheet
61000-07000-106, May 2011 58
Command Set
Code
Description
WRITE LONG SECTOR
32h or 33h
This command is provided for compatibility purposes and is
similar to the WRITE SECTOR(S) command except that it
writes 516 bytes instead of 512 bytes.
WRITE MULTIPLE
C5h
Command is similar to the WRITE SECTOR(S) command.
Interrupts are not presented on each sector, but on transfer of
block which contains number of sectors defined by SET
MULTIPLE command.
WRITE MULTIPLE W/O
ERASE
CDh
This command is similar to the WRITE MULTIPLE command,
except that an implied erase before the write operation is not
performed.
Note: Before using this command, it is required to erase the
respective sectors using the Erase Sectors command
WRITE SECTOR(S)
30h (w/ retry)
31h (w/o
retry)
This command writes from 1 to 256 sectors as specified in the
Sector Count register. A sector count of zero requests 256
sectors. The transfer begins at the sector specified in the
Sector Number register.
WRITE SECTOR(S) W/O
ERASE
38h
This command is similar to the WRITE SECTOR(S)
command, except that an implied erase before the write
operation is not performed.
Note: Before using this command, it is required to erase the
respective sectors using the Erase Sectors command.
WRITE VERIFY
3Ch
This command is similar to the WRITE SECTOR(S) command
except each sector is verified immediately after being written.