Datasheet

SLCFxxxM2TU(I)(-x) CompactFlash Card
Datasheet
61000-07000-106, May 2011 4
1.0 Ordering Information
Table 1 lists the Ordering Part Number for STEC MACH2 CompactFlash cards.
Cards can be ordered with options by appending the part number with designators (I, -P, -S):
 Configured for STEC Standard LBA/CHS (Part Numbers without -S): Card is optimized for
applications requiring STEC Standard LBA/CHS configurations
 Maximized Performance for multiple simultaneous random writes (-S): Card performance is optimized
to handle multiple simultaneous random writes.
 Security Command Set Support (-S)
 HPA Command Set Support (-S)
 TrueIDE PIO-only modes (-P): Card has UDMA and MWDMA transfer modes turned off. Use this
option if required for compatibility.
 Industrial (I): Card has an expanded operating temperature range of -40ºC to +85ºC.
 SMART Command Set Support (as shown in Table 1): Card issues advisory notification on product
wear parameters for scheduled replacement.
Note: While cards are shipped formatted for most applications, STEC recommends reformatting the cards
as needed for the customer’s application.
Table 1: Ordering Information
Ordering Part Number
Capacity
SMART Support
SLCF128M2TU(I,-P,-S)
128MB
-S
SLCF256M2TU(I,-P,-S)
256MB
-S
SLCF512M2TU(I,-P,-S)
512MB
-S
SLCF1GM2TU(I, -P,-S)
1GB
-S
SLCF2GM2TU(I, -P,-S)
2GB
Standard & -S
SLCF4GM2TU(I, -P)
4GB
Standard
SLCF8GM2TU(I, -P)
8GB
Standard
SLCF16GM2TU(I, -P)
16GB
Standard
Ordering Part Number Legend:
 SLCF = STEC standard CompactFlash card part number prefix
 128/256/512/1G/2G/4G/8G/16G = 128MB / 256MB / 512MB / 1GB / 2GB / 4GB / 8GB / 16GB Capacity
 M2T = MACH2 controller (2
nd
Generation)
 U = RoHS-6 compliant lead-free
 Part numbers without “I” = Commercial temperature range (0ºC to 70ºC)
 I = Industrial temperature range (-40ºC to +85ºC)
 -P = TrueIDE PIO-only modes
 Part numbers without “-S” = Configured for STEC Standard LBA/CHS
 -S = Maximized Performance, Security and HPA Command Sets