Operation Manual

Child lock

∙ Press the button . All buttons, except on/off are locked.

∙ In order to unlock, press the button for some seconds.

Troubleshooting

Dear Client,

Thank you for buying this high-quality STEBA product. The following table will help

you with problems that may occur when using your device. For many problems there

is a simple solution, because not everything that appears like a malfunction must be

serious. Please check the following list before sending the complete device to the

customer service for inspection.

Problem Reason Solution

No light after plug-in of

the device

∙ No power

∙ To many devices at one

power cord

∙ Check is plug is

plugged-in correctly

∙ Check the fuse

A signal tone sounds and

no heat occurs

∙ Pot is not in the middle

of the plate

∙ Pot not suitable for

induction

∙ Min. diameter of 12cm

∙ Use suitable cookware

Plate does not heat any-

∙ Timer run out ∙ Set a new time

Error code „E0“ ∙ Internal electronic error ∙ Contact service

Error code „E1“ ∙ No or unapproriate

cookware

∙ Check cookware

∙ Let device cool down

and restart

Error code „E2“ ∙ Internal overheat ∙ Check cookware

∙ Let device cool down

and restart

Error code „E3“ ∙ Over-voltage ∙ Contact service

Error code „E4“ ∙ Under-voltage ∙ Contact service

Error code „E5“ ∙ Error in the tempera-

ture sensor

∙ Contact service

Error code „E6“ ∙ Error in the IGBT sensor ∙ Contact service

Error code „E7“ ∙ Top plate overheat ∙ Check cookware

∙ Let device cool down

and restart