Operation Manual

24
Cleaning
Never immerse the entire device in water.
∙ Unplug the power cable from the socket.
∙ Allow device to cool.
∙ Remove inner pot and rinse with mild cleaning agent.
∙ (do not use aggressive cleaner such as pot cleaner).
∙ Clean hotplate and thermostat contact surface in outer pot with a damp cloth,
taking care not to deform the thermostat. Carefully remove the seal when cleaning
the lid.
∙ Remove all residue from seal and thread it back into the metal ring properly.
∙ If no steam comes out of the steam relief valve, the lid seal has been incorrectly
inserted. If the seal is damaged or brittle, please contact our customer service.
∙ Dry the lid – pour out any condensation that may be present.
∙ Remove valve for cleaning – pull off upper valve weight, clean and re-assemble
properly, otherwise the valve will not close.
∙ Wipe outer housing with a damp cloth with washing up liquid. If the device is not
going to be used for a long time, put lid on loosely upside down so that residual
moisture can escape and no odour build-up will occur.