Product Manual

II. INSTRUCTIONS FOR USE

A. PRE-DONNING INSTRUCTIONS

CHECK THE FOLLOWING BEFORE USING THIS PFD:

1. INSPECT PFD FOR DAMAGE

2. EXAMINE INFLATION MECHANISM STATUS INDICATORS

3. EXAMINE CO2 CYLINDER FACE FOR PUNCTURE HOLE

READ BELOW FOR MORE DETAILED INFORMATION!

1. Inspecting Your PFD For Damage

Make sure that the PFD is free from rips, tears or punctures. This

type of damage on the outside covering indicates that the

Inflatable Chamber may have been exposed to potentially

damaging elements. If these defects are noticed, discontinue use

of the PFD until you have the PFD inspected by an authorized

repair facility. The Inflatable Chamber should be checked for

leaks at the beginning of each season and at least every two

months during the boating season. The leak test procedure is

described under USER'S INSPECTION. (Refer to Page 10.)

2. Examine the INFLATION MECHANISM Status

Indicators. The Inflation Mechanism Status Indicators will tell

you if the inflation mechanism is properly ARMED/REARMED and

ready for use. The status indicator check instructions are provided

on the device near the inflation mechanism. Refer to Page 19 for

location of inflation mechanism. Manual inflator has a single

indicator for the Jerk to Inflate Lever.

The color of all Status Indicators have standard meaning:

GREEN = OK = READY

RED = NOT READY = SEE REARMING INSTRUCTIONS

(Back Cover)

All status indicators must be green for the mechanism to be

properly reset. If any indicator is red, immediately REARM. See

Back Cover for instructions.