Product Manual

13
HOW DO YOU TEST YOUR PFD USING THE ORAL
INFLATOR?
1. To test your inflatable PFD, you will not need any spare parts
or rearming kits.
2. Remove the CO2 cylinder, to prevent inadvertent activation of
the manual inflation system which could potentially damage
the PFD. Inspect the threaded end to confirm its un-used.
3. Put on the PFD.
4. Get into shallow water, just deep enough that you can stand
with your head above the surface.
5. If you are a weak swimmer or non-swimmer, inflate the PFD
partially so that you are supported well enough to be able to
complete inflation without touching bottom, either orally or
manually. Note this level of inflation because it is the
minimum needed for you to safely use this inflatable PFD.
6. Fully inflate the PFD using the oral inflator. Place PFD over
your head.
7. See if the PFD will float you on your back or just slightly back
of vertical. In a relaxed floating position, verify that your
mouth is well above the water's surface. Note the effect of
where you hold your legs on how you float.
8. Get out of the water and remove the PFD. Completely deflate
the PFD using the oral inflator.
9. Let the PFD dry thoroughly. REARM and REPACK the PFD
in accordance with the manufacturer’s instructions!