Specification Sheet

Permits draining of hot boiler water into the tank for cooling

before it is dumped into drainage system. Allows HC blow-

down system to comply with codes that prohibit the discharge

of water exceeding 140°F.

Blowdown Tank

70086 :ledoMknaT nwodwolB edoC EMSA

12/12

Pub. No. 410-B

PAGE 1
Blowdown Tank ® ASME Code Blowdown Tank Model: 68007 Permits draining of hot boiler water into the tank for cooling before it is dumped into drainage system. Allows HC blowdown system to comply with codes that prohibit the discharge of water exceeding 140°F. 12/12 Pub. No.
PAGE 2
Blowdown Tank DIMENSIONS AND FEATURES SUGGESTED HOOK-UP TO BOILER Specifications Chart Model Boiler HP (MAX) Dimensions A B C D E F G H Shipping Weight 68007 15 18" 1" 2" 12" 2-1/2" 2" 9¾" 27¾" 125 The Steamist separator design incorporates a water seal at the outlet which permits the operator to introduce cold water from the bottom to mix with the hot water and boiler steam blowdown in the separator. This reduces the outlet temperature to a level that makes it safe to discharge.