Integration Instructions

FCC AND ISED MODULE INTEGRATION INSTRUCTIONS
Page 2 of 4
Specific operational conditions:
Applicable FCC rules: CFR 47 Part 15, Subpart C (15.247)
Applicable ISED rules: RSS-247
Limited module considerations: The module is limited to OEM installation ONLY.
The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install the
module.
The final host product must be submitted to SteamIQ for confirmation that the host+module complies with the
regulations of the USA (FCC) and Canada (ISED).
Antennas:
The Lora module is for use with external antennas ONLY.
The antenna is Monopole Antenna and maximum gain is 1.04 dBi.
Trace antenna design: not applicable
This module has been approved by FCC to operate with the antenna types with the maximum permissible gain
indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type,
are strictly prohibited for use with this device. Specifically, if an antenna other than the model documented in the filing
is used, a Class 2 Permissive Change must be filed with the FCC.
Additional testing, Part 15 Subpart B disclaimer
The modular transmitter is only FCC authorized for the specific rule parts listed on the grant, and that the host
product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the
modular transmitter grant of certification. If the grantee markets their product as being Part 15 Subpart B compliant
(when it also contains unintentional-radiator digital circuity), then additional Part 15 Subpart B compliance testing is
required for the final host product with the modular transmitter installed.