User Manual

ENGLISH
|
9
GENERAL OPERATION
NOTE: Be sure that Water Tank has been filled and, if desired, the Fabric Brush is
connected before following these steps.
1. For first-time use, remove protective plastic cover that is shipped on electrical plug. Plug
power cord into a convenient electrical outlet.
2. Turn Steam Dial to desired steam level. Blue power indicator light will illuminate around
Steam Dial (I).
3. After approximately 45 seconds of heating time, unit will begin producing a flow of steam
from Steam Nozzle.
NOTE: It is common for the unit to produce gurgling sounds and small amounts of water
during the first few minutes of steaming. This is due to water condensation inside cold
Hose, and should be reduced as the Hose heats up.
4. Once steam flow is steady and excess condensation has been removed from Hose, you may
proceed with your steaming tasks. Refer to Fabric Steaming section on Page 10 for more
information about steaming garments and other fabrics.
CAUTION: Always be sure that Steam Nozzle is pointed in a safe direction (away from
yourself, other people, pets and plants) when steaming.
5. When you are finished using the Professional Fabric Steamer, immediately turn Steam Dial to
“Off” position and unplug power cord from electrical outlet. Refer to Storage and Care on
Page 11 for proper cleaning and storage procedures.
I