User Manual

ENGLISH

CONNECTING HANGER

1. Release hinges on Hanger.

2. Align Hanger to Telescoping Poles with Nozzle Cradle

facing the front of the unit.

3. Insert both ends of the Hanger onto the poles and press

both ends simultaneously until the Hanger properly

engages (C).

4. Close hinges to secure the Hanger is locked onto

the poles.

CONNECTING STEAM HOSE

Connect the Steam Hose to the unit by pulling upward

on clamping ring on bottom of hose (D). While pulling

up, push onto steam outlet on unit (E). Release clamping

ring and push down into place.

CONNECTING FABRIC BRUSH

1. Make sure Steam Dial is turned to Off position, and that unit

is not emitting any steam.

CAUTION: Do not try to connect Fabric Brush while unit is

emitting steam, as this can cause burns and injury.

2. Align long pegs on back of Fabric Brush with corresponding

slots on face of Steam Nozzle (F).

3. Press Fabric Brush ﬁrmly onto Steam Nozzle until it ﬁts snug

and ﬁrmly into place.