User Manual

6
|
ENGLISH
DOUBLE TELESCOPIC POLES
The Telescopic Pole is made up of three sections:
•
TOP (SECTION 1)
•
MIDDLE (SECTION 2)
•
BOTTOM (SECTION 3)
Sections 1 & 2 are adjustable in length. Section 3 is not
adjustable. By using the two extension locks, these sections
may be extended or retracted to achieve desired length. Refer
to Adjusting Telescopic Poles section below for more details.
CONNECTING TELESCOPIC POLE
1. Insert telescopic poles into the slots on top of unit
ensuring the power cord clips are facing the back of the
product toward the Water Tank.
REMOVE TELESCOPIC POLES
1. To remove telescoping poles from unit, push individual
levers on bottom of unit to the OPEN position (A). Pull
poles out of unit.
ADJUSTING TELESCOPIC POLES
1. Release extension lock directly below SECTION 1 by
swinging hinge outward (B). SECTION 1 can then be
extended or retracted.
2. Once SECTION 1 is at desired length, close hinge to once
again secure extension lock.
3. Repeat Steps 1 & 2 for remaining hinges.
NOTE: It is recommended to extend Telescoping Poles to
their full height during steamer operation; this will ensure
optimal steam flow through the Hose.
SECTION 1
(TOP)
SECTION 2
(MIDDLE)
SECTION 3
(BOTTOM)
Assembling Your
Professional Fabric Steamer
A
B