User Manual

6
|
ENGLISH
FILLING TANK WITH WATER
1. Place Handheld Fabric Steamer on a at, level surface.
2. Make sure power cord is unplugged from electrical outlet.
3. Remove Water Tank by grabbing on to ribbed sides and pulling out, see Figure 1.
4. Remove rubber cap from top of Water Tank and ll with water from a faucet, bottle or cup.
Follow marked Max and Min lines on Water Tank. Do not underll or overll Water Tank.
NOTE: In order to minimize potential mineral build-up and prolong the life of your
Handheld Fabric Steamer, distilled or de-mineralized water is recommended when lling
Water Tank.
5. Replace Water Tank by pushing rmly up into the unit, until it clicks into place.
Using Your
Handheld Fabric Steamer
FIGURE 1