Use and Care Manual

ENGLISH
|
9
SQUEEGEE
CAUTION: Always allow unit to cool before connecting/disconnecting any accessories.
1. Align Squeegee with Steam Nozzle as shown (FIGURE 6).
2. Slide Squeegee into Steam Nozzle, pressing firmly until release button snaps through hole.
3. To remove Squeegee, press firmly on release button while simultaneously pulling Squeegee
away from Steam Nozzle.
FABRIC STEAMER SETUP
FABRIC NOZZLE
CAUTION: Always allow unit to cool
before connecting/disconnecting
any accessories.
1. Align Fabric Nozzle with Steam Nozzle as
shown FIGURE 7).
2. Slide Fabric Nozzle into Steam Nozzle, pressing firmly
until release button snaps through hole.
3. To remove Fabric Nozzle, press firmly on release button while
simultaneously pulling Fabric Nozzle away from Steam Nozzle.
FABRIC BRUSH
CAUTION: Always allow unit to cool before connecting/
disconnecting any accessories.
1. Align Fabric Brush with Fabric Nozzle.
2. Insert tab on Fabric Brush into slot on face of Fabric Nozzle
(FIGURE 8). Press in until secure.
3. To remove Fabric Brush, simply pull it off of Fabric Nozzle.
It does not need to be released or otherwise unlocked.
FIGURE 6
FIGURE 7
FIGURE 8
±
±
±
±
RELEASE
BUTTON
HOLE
RELEASE
BUTTON
HOLE
±
±