Technical Specifications
!
Step five
Remove the closing paper at the bottom.
To achieve good sticking effect, keep the sticking
surface clean and dry.
Step six
Locate the display screen in the direction of 12
o'clock, and press tight the controller to stick it to the
wall.
Important:
T
o ensure horizontal installation
of the controller, use a gradienter if necessary.
Page 3
Step seven
Drill a round hole of Ф0.4 inches in diameter in a
chosen position put the TEMP sensor holder into the
hole and lock it with nut (more detail in Page6).
Controller function instruction
1. ON/OFF
When system is powered, all functions will still not be activated and rmain in a waiting
state. Digital tube will display " --- ." And show the real clock.
Function
1、TIMESET2、TEMPSET
3、LIGHT4、REALCLOCK
Control Panel Operation
2. ON
In the waiting state, press the button to turn on the system and activate steam
function. System will recall last use steam time and TEMP, system begins to count
down. During this time, the digital tube will display the ambient temperature. Steam
temperature display range is 32° F-140° F(0℃~60℃). When the actual temperature is
lower or equal to 32° F, the digital tube will display 32° F(0℃ ). When the actual
temperature is higher or equal to 140° F(60℃ ), the digital tube will display 140°
F(60℃). The default steam time is 30 minutes. When lacking water, the heating
GS08A