Technical Specifications

!
!
1.Use soft cloth with a little soap water to clean the controller.
2.Do not use crude cleaning tools.
3.If the decorating crust is damaged, telephone the service electrician to change it.
Safety and operation information of the controller
If the installation and operation instruction is not read or understood, do not
install or use in case there should be any dangerous installation and improper operation.
Install the controller based on the installation instruction, otherwise, the temperature in
the steam room will be too high or it is not heated enough.
If the controller is installed outside the steam room, the temperature sensor must be
installed in the bathroom. Operate based on the instruction otherwise the controller may
lose control or the bathroom will be overheated.
Caution:
Do not install the controller wire in the same wire rabbet with strong electric
wire. Do not get close to hot water or steam pipe, otherwise the controller may lose control
or the bathroom will be overheated.
Important:
Before installing the controller, make sure the steam generator is shut off
otherwise the controller may lose control or be damaged.
Do not use controller inconsistent with the steam generator, do not use the controller to
operate steam generator of other brands, otherwise the operation may lose control or the
machine will be damaged.
The instruction includes important safety, operation and maintenance information. Keep
the instruction in the user's hands.
If the steam generator is damaged or can not work normally, do not continue to install or
use the controller, otherwise the controller may lose control.
Blueprint for the control panel
Attention in controller
!
Warning:
Temperature sensor and holder
Control panel
Complete set including:
User manual
Middle cable between dual panels(6.5 feet )
3.5 inche s
5.9 inche s
C
D
Page 1
GS08A