Installation Guide

BF1101 DESCRIPTION OF FUNCTIONS

Not in the same order above

1. ON/OFF Key

Under ON state, press “ON/OFF” Key on the panel to start the system, and the top light is turned on, all functions are activated on the

panel, the back light is on, LCD shows the ambient temperature and all icons are lit; press the “ON/OFF” to shut off the system.

Press other keys except “ON/OFF” key under standby and OFF state, the backlight will come on, if the systems is not turned on, the

backlight will be turned off in 30 seconds.

Following functions are available when the system is on:

2. Circulation Fan:

Press key on the panel to start the fan the icon will light up on the LCD screen. Pressing the fan key again, will shut down the

circulation fan. This function circulates the steam throughout the enclosed shower space. No special exhaust needed for this function.

3. Steam Temperature and Time Setting:

Press TIME & TEMPERATURE key on the panel so that temperature icon is on the screen, system will enter into steam temperature

setting state. Press “+” or “-“key to increase or decrease temperature. The temperature range is 25-60°C (77-140°F); press this key

again to enter into time setting state. The time range is 1-99 minutes. If time or temperature is not adjusted within 5 seconds, the

system will automatically recover to display room temperature.

4. Steam:

Press key on the panel. The default steam time is 45 minutes, and the highest temperature is 45°C (113°F). By pressing the

steam key again, the steam system will shut off.

5. CD/FM Function:

Press key on the control panel or remote to activate the FM Radio, the corresponding icon will light up on the control panel.

The system will automatically switch to the previous frequency. Pressing this key the second time, will switch the function to CD mode.

The display will show the corresponding icon. Pressing the again will shut off the system.

6. Volume Adjustment:

When the speaker is ON, pressing the “+” or “-“on the key panel to increase or decrease the volume. When changing the volume, the

LCD monitor will display the corresponding changes.

7. Frequency or Channel Adjustment:

When the radio is ON, press the “TUN” key to adjust the frequency (radio channels). Pressing the “+” or “-“ button once, will increase

or decrease the frequency by 0.1MHz, holding it for 1 minute will automatically search channels. The search will stop once the next

station is found, and the LCD panel will display the corresponding channel. When the system displays channel, press “+” or “-“key to

adjust channels, the range is 1-25 channels.