Installation Guide

9 pg
Keypad Manual
Dial
There are two functions for the dial:
Rotate it to select the manual and music. Adjust the volume, time and temperature.
Confirm and exit
Icon
Power on/off
Steam on/off
Bluetooth
Select music – Press the dial to select this function (the light will flash), rotate the dial to adjust the volume. Press the
dial again to exit this function.
Light
Steam temperature adjustment – Press the dial to select this function (the light will flash), rotate the dial to adjust the
temperature. Press the dial again to exit this function.
Steam time adjustment – Press the dial to select this function (the light will flash), rotate the dial to adjust the time.
Press the dial again to exit this function.
Setting: Drain icon; Celsius/Fahrenheit Conversion
Display
PO is showed on the display when you select power on/off.
On/off will flash on the display when you select steam function. (When the steam is on, it shows “on”, when it is off, it
shows “off”). It will exit flash status and show current temperature if user doesn’t make operation after 20 seconds.
Press the dial to turn the steam on/off.
AUDIO will flash on the display when BLUETOOTH is selected. It will exit flash status and show current temperature if
user doesn’t make operation after 20 seconds. Press the dial to turn the Bluetooth on/off.
When the Bluetooth is on and the music function is selected, -CH- will flash. Press the dial to enter this this function -CH-
will stop flashing and the Bluetooth icon will flash. Rotate the dial to select music. Press the dial again to exit and the
display will show the current temperature.
When the Bluetooth is on and the volume function is selected, -DB- will flash. Press the dial to enter this this function -
DB- will stop flashing and the Bluetooth icon will flash. Rotate the dial to adjust the volume. Press the dial again to exit
and the display will show the current temperature.
LIGHT will flash on the display when light is selected. It will exit flash status and show current temperature if user
doesn’t make operation after 20 seconds. Press the dial to turn the light on/off. Keep pressing the dial to start
chromatherapy lights. The color circulation order is white, red, green, blue, yellow, and cyan. Release the dial when the
desired color is reached. The display will show “COL” when it starts circulation.
Note: You must have a BT music box for color lights.
To switch between Celsius and Fahrenheit, rotate the dial to the last icon. “DAN” will flash on the display. Press and hold
the dial to change to the desired scale. Press the dial again to exit.
“F” or “C” flash on the display when temperature is selected. Press the dial to display the preset temperature.
Temperature icon will flash. Rotate the dial to adjust the temperature and press the dial again to exit. The display will
show the current temperature. Continue pressing the dial for at least 6 seconds, the display will show “IN” and “OUT.”
“IN” means inside mode and the keypad is inside the steam room. The display will show the inside temperature. “OUT”
means outside mode and the keypad is outside the steam room. The display show inside temperature when the steam is
on and show the environment temperature when the steam is off. The default mode is inside mode.