Instructions / Assembly

8
Installation and operation
1Install two pieces of base on the bottom of the machine by driving two screws. It
provides stability of the machine.
2Insert the supporting pole into the body, and then screw it up with the knob.
3Unfold the supporting poles to the proper height and fix them.
4Place the hanger with hook on the top of the supporting pole, and unfold the hanger.
5Insert the head of the steam pipe into the sheath, and screw it up according to the
drawing direction .
6Turn on the power, turn the switch to the ‘1’ level and the indication light will be on, and
wait for the steam. Turn the switch to “0”, then the steamer turns off. Unplug the plug while
it is unused.
Spray head
Foldable hanger
Upper pole
Central pole
Lower pole
Switch
Buckle button
Steam pipe cover
Steam pipe sheath