Owner's Manual

2
Installation
- The swing away tube clamp (A) and the 1 3/8" male tube clamp (B) is used
to mount the hardware onto a 1 3/8" tubing.
- The spacer package is used when mounting onto a smaller tube.
3. Place the appropriate bushing (E) on the swing-away tube clamp (D) and use
the corresponding-sized male tube clamp (F) before mounting.
(A)
(B)
(C)
(F)(E)(D)
To install the track-style (RLSPKGTB3) hardware:
Align the two (2) track nuts into the groove on the side of the wheelchair. Slide the
assembly into the desired location, then use a 5/32" hex key to tighten the screws
rmly in place.