Owner's Manual
5
First Time Use
CAUTION
If the wheelchair is involved in a collision, check all hardware thoroughly for
damage. If there are any signs of damage, have a qualied technician
inspect and replace the damaged components or send the parts
to Stealth Products for a complete overhaul to ensure future safety.
During rst time use by the client, it is advised that the dealer or service
technician not only assembles the components, but also explains the
congurations or positioning to the customer (i.e., the user and/or the attendant).
If needed, the dealer or service technician can make nal adjustments.
Dealer Assistance
It is important that the customer is fully aware of the installation of the Residual
Limb Support, how to operate it, and the ways in which it can be adjusted to t
the specic needs of the client. A dealer should explain and demonstrate the
necessary installation steps, and should explain the functions of the device's
components.
• Explain and demonstrate the initial setup of the Residual Limb Support, and
explain the functions of all attached equipment.
User Testing
The Residual Limb Support is intended for use as installed by Stealth Products,
in accordance with the installation instructions in this manual.
• The foreseen conditions of use are communicated by the dealer or service
technician to the user and/or attendant during the rst-time use.
• If the usage conditions change signicantly, please contact your dealer or a
qualied service technician to avoid unintended damage.
Conditions of Use
Ensure the hardware used stays in working order by caring for and maintaining it.
• Keep electronics dry.
• Periodically check any hardware for loose screws or worn parts. Replace or
repair the parts as necessary.
Care and Maintenance