Manual

STC-V650
www.stealthcam.net Toll Free 877-269-8490
16
Set up and Programming
When the camera is first turned on, the internal LCD screen
displays the camera status. The following information is displayed
on this screen.
Flash
Mode Control:
The camera is pre-programmed with Auto Flash setting.
• Switch the camera to ON position.
• To turn off the flash
mode, press the [UP] button
once within 30 seconds.
icon will appear on the top of the
screen.
• To turn on the flash
mode back to Auto setting, press the [UP]
button the second time.
icon will appear on the top of the
screen.