Owner's manual

ManualsBrandsStealth Cam ManualsCamcordersSTC-DASHCAM Dash Cam

"#$%&'( % ")#!*+# ' + , !

MODEL:'STC+DASHCAM'

---.$%/+,%0(+*.()*!

%122!3455!67789:;86<;=!

Summary of content (13 pages)

PAGE 1
INSTRUCTION MANUAL MODEL: STC-‐DASHCAM WWW.STEALTHCAM.
PAGE 2
Read this User manual carefully before using this product. Failure to understand operating procedures may result in injury Version 2.0 **IMPORTANT NOTE** To ensure the product is being utilized to its full potential, we recommend checking our website for new product updates.
PAGE 3
Overview Stealth Cam’s Dash Cam is a camera system that provides a safe and convenient DIY recording solution for all types of applications. The camera system is easily installed allowing the user to record the video and preview on the portable 2.5” LCD screen. This camera captures video day or night.
PAGE 4
Camera Kit Content 1. HD Camera 2. Suction Holder 3. 5V DC car charger 4. USB cable 5. Li-‐ion Battery 2 3 4 5 1 Camera Overview 9 8 15 14 11 1 6 2 3 4 1. 2. 3. 4. 5. 6. 7. 8. 9. 13 7 5 Menu button Down button UP button Mode button 2.5” LCD screen Power button Record (REC) button HDMI out USB port 10. 11. 12. 13. 14.
PAGE 5
12. Speaker 13. SD card slot 14. DC socket 15. Mic 16. Lens 17. Infrared lamp First, install battery. The side with polarity marking should be facing up. 11 NOTE: When the lithium battery power 10 is low, the screen will show ”Low 16 User manual Battery” and DVR will power off 12 17 automatically after 5 seconds.
PAGE 6
SD Memory Card Insert SD memory card correctly into the SD card slot. 13 SD Card No SD Card Installed Installed If SD Card is not installed, When SD Card is installed, you’ll see a “INT” icon. you’ll see SD Card icon on the screen.
PAGE 7
5. Frequency: 50 Hz/60 Hz 6. Screensaver: 1 min/3mim/5 min/Off 7. Rotate (Recording Image): Off/On 8. Format: Cancel/OK 9. Default Setting: Cancel/OK 10.
PAGE 8
the display screen. Press REC button to stop the auto record and put the camera in pause mode. Video Mode Screen Display Video Mode Recording Cyclic Video Recording SD Card Exposure Installed Video Mode Setting Press MENU button once to enter the video setup screen.
PAGE 9
6. Date Stamp: Off / On 7. Beep Sound: Off / On Camera Mode Screen Display ISO Camera Mode Setting While camera is paused, press MODE button once to enter the camera mode setup screen.
PAGE 10
6. White Balance: Auto/Daylight/Cloudy/Tungsten/Fluorescent 7. Color: Color/Black & White/Sepia 8. Exposure: -‐2.0 çè+2.0 9. ISO: Auto/100/200/400 10. Anti Shaking: Off/On 11. Quick Review: Off/2 seconds/5 seconds. 12. Date Stamp: Off / Date / Date & Time Playback Mode While camera is paused, press MODE button twice to enter playback mode.
PAGE 11
MENU button to exit. You will see a Key symbol on the top of the playback footage. This signifies the file is locked. Useful tip -‐ Protect Important Files During Recording You can protect (Lock) important files you would like to keep by pressing MODE button while recording.
PAGE 12
USB Mode Connect the camera to a computer USB port via the USB cable that came with the unit. The camera display will show two options: Mass Storage / PC Camera. Use the UP/DOWN button to choose Mass Storage and then press REC button.
PAGE 13
Specifications: Image Sensor Resolution View Angle IR LED Video Format Video Compression Power supply Battery Night vision range Monitor Size Memory Card support Interface 1/4 Color CMOS HD 1080P (24fps) 120 degree 6 AVI MJPEG DC 5V Rechargeable Lithium-‐Ion 2 meters / 6 ft 2.