User's Manual

UM000004-1_3 - Micro.sp (Q)Be © Station System v4 User Manual
7
Ste Industries
Via privata Oslavia 17/8D – 20134 Milano
www.ste-industries.com – [e-mail]
1.4.3 Wireless sensor monitoring
Wireless sensor system is based on Micro.SP© technology.
Whenever a vehicle passes through the gate, Data from TPMS sensors is transmitted
continuously from valves, located into each tire of the vehicle, to receivers located into
(Q)Be© station master and slave towers. Transmitted data includes tire pressure,
temperature and battery voltage.
1.4.4 GPRS/3G communication
Master tower is programmed to gather the TPMS data packets received by the two towers
and send them through the 3G module to the central database station, where data is
processed and analyzed.
1.4.5 PC configuration and system requirements
• Operating system: Windows 7, 8 or 10
• VCP (Virtual COM Port) driver for FT230X chip. Please refer to section 2.2 for driver
download and installation.
1.5 Physical Description
The following sections describe the physical characteristics of (Q)Be© station.
1.5.1 (Q)Be © Mother Board
Figure 2 - (Q)be© mother board (master) box
The (Q)Be© mother board is encased in a waterproof plastic box IP66 compliant plastic
case to guarantee protection from water, dust and moisture.