User's Manual

UM000004-1_3 - Micro.sp (Q)Be © Station System v4 User Manual
17
Ste Industries
Via privata Oslavia 17/8D – 20134 Milano
www.ste-industries.com – [e-mail]
Figure 11 – Gate Interface settings
2.1.10 Vehicle detection test
Scope of this test is to determine the optimum sensitivity thresholds for Master and Slave for any
location.
A vehicle with TPMS sensors equipped on its tires is required for this test.
1. Open the box containing Master circuit board and press PL1 button in order to activate
Status LEDs. Repeat this procedure on Slave unit. Wait until both DL3 and DL5 turn off.
2. Transit with the vehicle in the area between the two towers and check that:
a. When the vehicle approaches the Gate, LED DL2 is turned ON both on Master
and Slave for about one second.
b. Immediately after DL2 activation, DL3 is turned ON both on Master and Slave.