Introduction Thank you for purchasing the Gazebo GZ3. When properly assembled and maintained, this gazebo will provide many years of enjoyment! These instructions include helpful hints and important information needed to safely assemble and properly maintain the gazebo. Please read these instructions completely before you begin. Our patented gazebo has been designed for easy assembly. All steps can be completed by a team of four people. The assembly should take about two hours.
STEP 1 Assembling the Corner Profiles Place all the parts on a level surface. Make sure the pieces are in the correct positions before assembling. Carefully follow the order of assembly to ensure an easy installation. Wear proper safety gear including work shoes, gloves and goggles. Components Corner profile (1) Roof connector (4) Support plate (3) Support frame (2) Screw (29) x4 x4 x4 x4 x 16 1.
1.B Slide support frames (2) over lower end of corner profiles (1). Attach support plates (3) to corner profiles as shown, using two screws (29) for each plate. 1 2 1 3 29 Leave support frames (2) about 10”over lower end of corner profiles (1) until step 4 (Securing the gazebo to the ground) 1 2 3 x4 1 www.stcny.
STEP 4 Securing the Gazebo to the Ground 4.A Fasten the gazebo frame to the ground, using four spikes (37) for each support plate. Lower support frames (2) to cover support plates (3). Components 1 2 Ground spike (37) 1 x 16 37 3 3 Optional Securing the Gazebo to a Concrete Floor or Wood Deck Concrete Floor: Components 1. Using a concrete drill, drill holes into the concrete floor, corresponding to the holes in support plates (3). 2.
B
B B
Gazebo GZ3 Santa Monica Aluminium Composite Roof Panels Assembly Instructions EasyGrow 8’x 12’ Greenhouse Systems Trading Corporation 450 7th Avenue Suite 2809, New York, NY 10123 Customer service: (877)782 4482 www.stcny.
