Owner's manual

19
WPS-550-BUL-A Installation Manual
© 2013 Wirepath Surveillance
 •Todisplaythecameranameon
the screen, set the CAM TITLE
to ON.
 •Selectacameranamebyselecting
one letter/number at a time using the
menu at the bottom of the screen.
Consider assigning a Camera Name
that highlights the location of the
camera such as Lobby, Main Hall,
Entrance 1, etc.
 •PressCLRtoclearallletters,pressPOStochoosetheposition
of CAM NAME on the screen, and press END to exit the menu.
MOTION Setting
Motion Detection allows for up to 4 zones
of motion detection. When an object in
one of the zones moves, the camera will
highlight motion in magenta rectangles.
This allows for monitoring motion more
 efciently.SetMOTIONDETtoONto
enter into the Motion subdirectory
for settings.
 •Selectzones1~4under“AREA SEL”toadjustthesettingsofthearea
(zone) for motion to be detected.
•AREASTATE: Set to ON to display the detection zone on the
screen, set to OFF to hide the detection zone on the screen.
 •Customizethesizeandthepositionofeachdetectionzoneby
adjusting HEIGHT,WIDTH,LEFT/RIGHT,TOP/BOTTOM values.
•DEGREE: Increase motion detection sensitivity by increasing this
setting.
 •VIEW: When set to ON, the screen will highlight motion of the
moving object with magenta rectangles.
CAM TITLE
0 1 2 3 4 5 6
7 8 9 A B C D E
F G H I J K L M
N O P Q R S T U
R W X Y Z → ←
↑↓（（~_（/=&’（
.
← → CLR POS END
------------------------------
MOTION
AREA SEL. AREA 1
AREA STATE ON
HEIGHT -----|-------------- 8
WIDTH -------------|----- 32
LEFT/RIGHT ---|---------------- 4
TOP/BOTTOM --------|---------- 24
DEGREE ------------------| 40
VIEW ON
RETURN RET