Instruction Manual

Pg. 4
WATTBOX™ 600 Chassis Series Owners Manual
Securing Power Adapters
IP Connections
The WattBox™ 600 series is supplied with hook & loop straps that can be used to secure power adapters the outlets.
1. Remove the screw on both sides of the outlet.
2. Insert the screw in the eyelet on the hook & loop straps.
3. Tighten the screw to secure the strap.
4. Wrap the hook & loop straps over the power adapter and fasten them together.
After connecting the WB-600CH-IPVCE-12 to the network, conguration for IP control is performed using the Wattbox
Utility. The utility and documentation on conguring the Wattbox can be found on the included CD Rom and the SnapAV
website (www.SnapAV.com).
Note: The WattBox™ must be connected to the network and the router on before supplying power to the WattBox™.
FILTER 3
CONTROLLE D 6 CONTROLLE D 8
WB-600CH-IP VCE-12
FILTER 1 FILTER 2
ALWAYS ON 1 ALWAYS ON 3
ALWAYS ON 2 ALWAYS ON 4
CONTROLLE D 1 CONTROLLE D 3
CONTROLLE D 2 CONTROLLE D 4
CONTROLLE D 5 CONTROLLE D 7
GROUND
LUG
RESET
NETWORK
INTERNET
SYSTEM STA T US
SAFE VOLTA GE
IN IN
OUT
ON OFF
OUT
AUTO REBOOT
SAFE VOLTA GE
PROTECTED
GROUNDED
WB-600CH-IPVCE-12
Router
161514131211109
1 2 3 4 5 6 7 8
abc def ghi jkl mno pqrs tuv
wxyz 0
＊
#
PAGE
REC
ALARM RESET
CALL MODE/
MENU/ESC BACK PTZ
ENTER
HDD
NET
/
SEARCH SEQ/ MUTE/NEXT DEL X2/GOTO
ID
WPS-300-DVR-9CH
Surveillance DVR
Internet