Owner's manual

ManualsBrandsStaub Electronics ManualsAccessories for electricalWB-400-IPCE-8 WATTBOX - IP CONTROLLABLE 8 OUTLET COMPACT POWER CONDITIONER WITH AUTO REBOOT

pg.1

™

OWNERS MANUAL

WB-400-IPCE-8

KEY FEATURES

Surge Protection with Fireproof MOVs - Advanced Ceramic MOV technology reduces risk of re from surges.

Surge Disconnect - In the event of a catastrophic surge event, this Wattbox

™

component will sacrice itself and permanently

disconnect AC power.

Noise Filtration - Eliminates AC noise to improve picture and sound quality.

Flexible Power Cord - Wattbox

™

power cords are both exible and durable and designed for ease of installation.

Secondary Protection - Protected 3 GHz signal coax/satellite connections plus Ethernet / Telephone connections.

Flexible Mounting - Wattbox

™

exible mounting options allows vertical, horizontal or angled mounting. Mounts ush with back of

the rack and allows the installer to easily reach outlets. Hardware is included to mount to the wall or back of a cabinet. See Mounting

Options on Pg. 4.

IP Control - Provides control of outlets over an IP network. Cycle outlet state, turn outlets On or Off through a web browser.

Auto Reboot - Monitors network activity and resets power to outlets when programmable conditions are met.

Outlet Control Scheduling - Congure outlets to turn Off or On at a specic date or time.

System Notications - Programmable email notications keep you informed of System Status Changes.

WELCOME TO WATTBOX

™

WattBox

™

power products are designed specically to provide customers with advanced protection for their valuable electronics, and

Custom Integrators with maximum exibility for installation. With this IP-enabled power conditioner, both service calls and system

downtime are reduced, and the self-healing Auto Reboot feature automatically resets components that become unresponsive on the

network. Plus, you get a host of remote access features to monitor and control individual outlets – even receive email notications that

keep you informed about the system’s status.

Rest assured that WattBox

™

products will deliver the protection and safety for your customers’ needs. All WattBox

™

products are

UL certied and built with the highest quality components available, such as Fireproof MOVs. Whether in a rack, a structured wiring

enclosure, or behind a at screen, the versatile mounting options offer simple installation of WattBox

™

for easily managing power

cords, adapters and signal cables.

WattBox

™

is the ideal choice for Custom Integrators who demand reliability, safety, and exibility when installing power products for

their valued customers.

™

See Specifications for Individual Amounts

SURGE

PROTECTOR

$50,000

PROTECTED

AUTO REBOOT

SYSTEM STATUS

INTERNET

POWER

GROUNDED

WB-400-IPCE-8

OUT OUT

CONTROLLED 1

CONTROLLED 3

ALWAYS ON 1 ALWAYS ON 3

ALWAYS ON 4

ALWAYS ON 2 CONTROLLED 2

CONTROLLED 4

Summary of content (12 pages)

PAGE 1
™ OWNERS MANUAL WB-400-IPCE-8 ALWAYS ON 3 CONTROLLED 1 TM CONTROLLED 3 SYSTEM STATUS ALWAYS ON 4 CONTROLLED 2 POWER AUTO REBOOT CONTROLLED 4 SURGE PROTECTOR PROTECTED Y ALWAYS ON 2 IN PR O GROUNDED $50,000 RANT OUT OUT CT W IN LIFETI INTERNET DU ME WB-400-IPCE-8 AR ALWAYS ON 1 See Specifications for Individual Amounts KEY FEATURES Surge Protection with Fireproof MOVs - Advanced Ceramic MOV technology reduces risk of fire from surges.
PAGE 2
WB-400-IPCE-8 Installation and Users Manual PACKAGE CONTENTS (1) WB-400-IPCE-8 (4) Rubber Feet (1) 6ft Power Cord (2) Sheets of Power Cord Labels (16 total labels) (2) Small Brackets (1) Owner’s Manual (2) Large Brackets (1) DVD Rom Containing Support Documents and WattBox™ Utility Software (8) Bracket Screws (4) Washers, Screws, and Anchors (6) Power Adapter Hook & Loop Tie Down Straps 3 REAR PANEL RESET 1 ALWAYS ON 1 ALWAYS ON 3 CONTROLLED 1 4 NETWORK 2 5 6 7 8 9 TM CONTROLLED 3
PAGE 3
WB-400-IPCE-8 Installation and Users Manual LED OPERATION TM INTERNET SYSTEM STATUS INTERNET AUTO REBOOT SYSTEM STATUS PROTECTED AUTO REBOOT INTERNET GROUNDED PROTECTED SYSTEM STATUS INTERNET GROUNDED AUTO REBOOT INTERNET SYSTEM STATUS PROTECTED SYSTEM STATUS AUTO REBOOT GROUNDED AUTO REBOOT PROTECTED PROTECTED GROUNDED GROUNDED Green (Solid): All sites/IP Addresses are communicating with the WattBox Green (Flashing): WB-400-IPCE-8 At least 1 (not all) Sites/IP Addresses are communicating with the
PAGE 4
WB-400-IPCE-8 Installation and Users Manual MOUNTING OPTIONS The Wattbox™ 400 Series is designed for standard 19” equipment racks and features versatile mounting options. The multi-position bracket allows vertical, horizontal or angled mounting. The unit can also be mounted flush with the rack or set back to the most convenient position for a particular installation. Attach the brackets to the Wattbox™ in the position desired. Install the Wattbox™ using supplied hardware.
PAGE 5
WB-400-IPCE-8 Installation and Users Manual WALL MOUNTING The WB-400 series can be mounted to a wall or cabinet by using the small bracket. Mount the small bracket to the WB-400 with the flat part of the bracket facing away from the outlets. 1. Locate wall studs using a stud finder (not included). 2. Position the provided template on the wall in the desired location of the Wattbox™. If the location does not allow for this, use a wall molly or anchor with the appropriate weight rating for the Wattbox™.
PAGE 6
WB-400-IPCE-8 Installation and Users Manual IP CONNECTIONS WB-400-IPCE-8 RESET NETWORK Router 1 2 abc 3 def 4 ghi 5 jkl 6 mno 7 pqrs 8 tuv 9 wxyz 10 11 12 13 14 15 16 PAGE 0 ＊ # CALL MODE/ MENU/ESC BACK PTZ HDD NET ENTER / REC SEARCH ALARM RESET Internet SEQ/ MUTE/NEXT ID DEL X2/GOTO WPS-300-DVR-9CH Surveillance DVR After connecting the WB-400-IPCE-8 to the network, configuration for IP control is performed using the Wattbox Utility.
PAGE 7
WB-400-IPCE-8 Installation and Users Manual IMPORTANT SAFETY INSTRUCTIONS Read and observe the following safety points at all times. WARNING – Power Sources Do not plug this Component into a power outlet that differs from the source indicated for safe use on the Component. If you don’t know the type of electrical power that is supplied to your home, consult your local power company or a qualified electrician.
PAGE 8
WB-400-IPCE-8 Installation and Users Manual Symptom Wattbox™ is not receiving power. Possible Cause Wattbox™ is not turned On. TROUBLESHOOTING • In some households, a wall switch may need to be turned on to make the wall outlet active. Try turning on the light switches located near the wall outlet. • Press Wattbox™ resettable circuit breaker button in to reset. Please allow 10 minutes before attempting to reset.
PAGE 9
WB-400-IPCE-8 Installation and Users Manual SPECIFICATIONS AC Power Line Voltage 120V, 60Hz AC Input Connection IEC C-14 Power Cord Length 6 Feet Circuit Breaker Rating 15A UL Current Rating 12A Voltage Protection Rating (UL 1449 3rd Edition) 500V Joule Rating 3240 Joules Surge Component Ceramic Encased MOV Protection Modes L-N, L-G, N-G Peak Impulse Current 72,000A Disconnect Circuitry Yes Thermal Fuse Yes Outlets Type NEMA 5-15 Number of Outlets 8 IP Controlled 4 EMI / RFI
PAGE 10
WB-400-IPCE-8 Installation and Users Manual WARRANTY SnapAV Surge Protector Lifetime Product Warranty SnapAV warrants to the purchaser of any standard SnapAV surge protector that the surge protector shall be free of defects in design, material, or workmanship, and SnapAV will repair or replace any defective unit. For product replacement, see “NOTIFICATION” below. Lifetime Replacement Policy Valid only in the United States and Canada.
PAGE 11
WB-400-IPCE-8 Installation and Users Manual 4. DETERMINATION OF FAILURE: SnapAV will evaluate the protector for surge damage. The protector must show signs of surge damage or must be performing outside of design specifications relative to its surge protection capability. Opening the enclosure, tampering with, or modifying the unit in any way shall be grounds for an automatic denial of your request for payment.