OWNER’S MANUAL SM-SBAR-BKT >> SOUNDBAR DISPLAY MOUNT ADAPTER
SM-SBAR-BKT Assembly Manual ADJUSTING THE BRAKCET The SM-SBAR-BKT can be adjusted to allow for the desired positioning of a soundbar for depth and height relative to the display. This is achieved by a sliding Tray bracket and by changing the orientation of the Hook bracket. NOTE: This Strong™ bracket has been designed to work with any Episode® Soundbar products but can be used with any other manufacturers’ models.
SM-SBAR-BKT Assembly Manual ASSEMBLY STEPS 1.Install the Hook Brackets to the rear of the display. Once installed, the brackets will be between the display and the wall mount. NOTE: On larger displays only the bottom screw will be used. 2. Insert the Tray brackets into the rear of the Hook Brackets. Keep the set screws loose to allow for adjusting the depth of the soundbar once installed in step 3. 3. Cut the provided Trim piece to the width of the attached sound bar. 4.
SM-SBAR-BKT Assembly Manual 5. Attach the Soundbar to the installed Tray brackets and secure with the screws provided with the ES-300-SNDBAR. 6. Adjust the soundbar to the desired depth in relation to the display. 7. Tighten the set screw for each tray bracket. If using a non Episode™ soundbar, verify that screws have been provided by the manufacturer. Set Screw LIFETIME LIMITED WARRANTY Lifetime All Strong™ products have a Lifetime Limited Warranty.
