Instruction Manual

1 Voice Type Female Choose male or female voice for audio alerts.
2 Audible Voice On For all initial audio alerts: “Voice On” uses
voice; “Voice Off” uses tones only.
3 Test On Controls length of startup sequence after
powering on unit. “Test On” is standard 5-
second test. “Test Off” uses an abbreviated
sequence.
4 Speed Displayed On “Speed On” displays current speed in mph
when driving over 5 mph. “Speed Off”
turns off this display.
5 Compass Heading On Displays current compass heading when
driving over 5 mph.
6 POP Radar Band Off Enables the detection of POP radar, a very
short transmission signal that does not
transmit long enough to gather information
needed to issue a speeding ticket.
7 Quiet Ride On All audio alerts – except for “Marked to
Alert” locations – are automatically muted
when driving below a preset speed. Factory
setting is 25 MPH.
8 X-Band On Enables the detection of X-Band radar.
9 K-Band On Enables the detection of K-Band radar.
10 KA- Band On Enables the detection of KA-Band radar.
11 Laser On Enables the detection of laser.
12 Factory Reset RESET! Returns the K40 to its original factory
defaults for all settings.
Default
Setting
Menu Options
(in order displayed)
Description
To save your settings and exit:
• Press and hold MENU button for 3 seconds. (or do
nothing for 10 seconds)
• The display will show EXIT and the voice will announce
“Exit”.
15