Instruction Manual

Mark Location

The “Mark” function allows you to receive both audio and

visual alerts for specific locations you’ve stored. (Examples:

school zone, speed camera, red-light camera intersection).

• To activate, press and release MARK button when you

are at the location.

• Display shows Alrt Loc and voice announces “Marked

to Alert”

• After marking the location, in the future the RL100 will

alert you:

To remove a previously marked location: Press and

release MARK button while in that location.

To remove all currently stored locations: Press and

hold MARK button for 5 seconds at any time.

Mute Sounds

Using the MUTE button, the RL100 provides you two ways

to mute audio alerts (both voice and tones):

• OPTION 1: Silence all audio after an alert has sounded.

• OPTION 2: Silence all audio for a preset time before any

alert occurs. (Example: You may mute sounds

for 2 minutes prior to making a phone call.)

When you arrive… You will hear a…

…within a radius of 1500 feet ..."Bing Bong" tone and the

of the marked location display will show Alrt Loc

...at a marked location ...single “Bing” tone